PAG oil 100

Name: PAG oil 100
Brand: Würth
SKU: 0892764026

OIL-PAG-100-250ML

Art.-no. 0892764026

EAN 4050641049377

All versions

Individual price display after login

PAG oil 100

Art.-no. 0892764026

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

PAG (polyalkylene glycol) air-conditioning compressor oil for vehicle air-conditioning systems using R134a refrigerant

Good mixing behaviour

Optimal lubrication

High level of wear protection

Excellent separating properties (hydrophobic)

Assured thermal stability

Notice

Do not mix with other oils and lubricants. Store so the oil is protected from moisture. Open cans must be used up immediately and must not be stored.

The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For maintaining, lubricating and cooling vehicle air-conditioning compressors, sliding and rotating parts in the R134a air-conditioning circuit.

Instructions

Top up low compressor oil according to the amount used or to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit.

Contents	250 ml
Weight of content	300 g
Smell/fragrance	Characteristic
Min. flashing point	244 °C
Density	1.2 g/cm³
Viscosity/consistency	Liquid
Kinematic oil basis viscosity	100 mm²/s
Water-soluble	No

Additive article:

Product

Description

Quantity

Price
/PU

Premium UV leak detection additive

LKDETRADD-A/C-PREMIUM-240ML

Art.-no. 0892764034

Fluorescent additive for locating leaks in R134a, R1234yf and R744 air-conditioning systems in accordance with SAE J2297

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove

Description:

Permeation level: 3

With cotton velour finish inside.

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.